Top 10 Qrity Tubular Mortice Latch UK – Latches & Bolts

As an Amazon Associate I earn from qualifying purchases.

1. Decoranddecor

#ad

Nickel, DecorAndDecor Tubular Mortice Latch Operated by Lever Handles 44mm-64mm

#ad
Decoranddecor #ad - Available in brass, nickel and black colours with their matching striker plates and screws. Suitable for both commercial or home use. All latch models comes with fixings. Soft sprung latch for effortless operation. Available in two sizes for 44m-64mm or 57mm-76mm depth.
BrandDecoranddecor #ad
ManufacturerDecoranddecor #ad
Height24
Length71
Weight0.1 kg (0.21 Pounds)
Width57

2. Sterling

#ad

Brass, Sterling TML125 Internal 2 1/2" 65mm Nickel Tubular Mortice Latch 2.5" 10 Pack

#ad
Sterling #ad - Sprung high quality latch for effortless operation. Nickel finish including striker plate & screws. Pack of 10 65mm 2. 5" nickel Tubular Mortice Latches. Suitable for commercial and domestic use.
BrandSterling #ad
ManufacturerSterling #ad
Height15 cm (5.91 Inches)
Length17.5 cm (6.89 Inches)
Weight0.75 kg (1.65 Pounds)
Width15 cm (5.91 Inches)
Part NumberTML125NP
ModelTML125NP

3. UAP

#ad

UAP 4 Sets 75mm Tubular Latch Square, Door Latches for Internal Doors Square Corners, Tubular Door Mortice Latch, Satin Stainless, 75mm, Door Hardware Polished Stainless Steel Finish 4 Pack

#ad
UAP #ad - 90% of uap products are designed in the UK. Note: door latches for internal doors should be fitted by a locksmith or someone suitably trained. This internal door lock is available in either a 65mm or 75mm length, and can be purchased in either 2-pack or 4-pack variations.

It is available in either a polished stainless steel, satin stainless steel or Evershine brass finish, and comes with square corners. Impressive door latch features: the uap intelligent hardware tubular latch tubular mortice latch is a door catch which provides latching for internal doors where no locking is required. Increases safety: the intelligent hardware tubular latch has been approved in accordance with BS EN12209 standards, making it a suitable door catch for 30-minute fire door assemblies. The uap tubular latch is also CE marked, meaning the product meets essential European standards of quality and safety.

All fittings included: all fixtures and fittings including the internal door mechanism, door strike plate, door latch plate and door barrel are included, and the order comes complete with fixing screws. Two sizes & dimensions available. A brand you can trust: uap has an extensive and market-leading portfolio of products and has created innovative solutions for the fenestration, locksmith and building industries for more than 20 years.
BrandUAP #ad
ManufacturerUAP #ad

4. Yale

#ad

2.5 Inch/64 mm, Yale P-M888-PB-64 Tubular Mortice Latch, Visi Pack, Brass Finish, Suitable for Internal Doors

#ad
Yale #ad - Mortice latch yale p-m888-pb-64 tubular Mortice Latch ideal for internal doors where locking is not required. Suggested use For use with lever handles. Versatile suitable for both left and right handed doors. Colour and dimensions available in a Brass finish, the mortice latch has a 2. 5 inch/64mm backset. Standard security this door latch has a standard level of security and a 2 year guarantee.
BrandYale #ad
ManufacturerYale #ad
Height19.51 cm (7.68 Inches)
Length3 cm (1.18 Inches)
Weight0.09 kg (0.2 Pounds)
Width4.53
Part NumberP-M888-PB-64
ModelP-M888-PB-64

5. Sterling

#ad

Sterling TML125N 63mm Nickel Tubular Mortice Latch, 2.5"

#ad
Sterling #ad - Nickle finish including striker plate & screws. Suitable for commercial and domestic use. Sprung high quality latch for effortless operation. Supplied with fixings. Also available in 75MM & in brass finish.
BrandSterling #ad
ManufacturerSterling Locks #ad
Height0.91
Length6.3 cm (2.48 Inches)
Weight0 kg (0.01 Pounds)
Width0.47
Part NumberTML125N
ModelTML125N
Warranty10 year.

6. ZACUDA

#ad

ZACUDA 5 Pcs Tubular Latch Tubular Mortice Latch 45 mm Lubricant Rebate 2.5Inch Tubular Door Latch Set Compatible with Various Door Lock Handles with Polished Plate & Screws for Internal Doors

#ad
ZACUDA #ad - Internal lubricant anti-rust:this kind of mortice latch has lubricant inside the lock cylinder, which is not only can reduce the friction between the lock core and the metal bracket, the lubricated lock cylinder can be used very smoothly when opening or closing the door, but also can effectively protect the lock core, so that the lock core has a good anti-rust effect.

High-quality metal & high-strength spring:this kind of mortice latch is made of high-quality aluminum alloy material and high-quality iron material, which can effectively keep the oblique tongue in the metal bracket, wear resistance, corrosion resistance, and resistance to deformation. And the inside of it has a high-strength spring, which has the characteristics of high hardness, even if it is used for a long time, it will not be affected use by the deformation of the spring. In addition, which will not get stuck due to rust. Complete mortice latch set & easy to replace:this kind of mortice latch set is including 5 mortice latches, 5 stoppers, and 20 screws. The screw installation method can make the lock cylinder more firmly fixed, which the surface is very smooth, and there are no burrs, so that it will not cause the lock cylinder to fall off due to excessive door-closing force.

And the mortice latch, baffle plate and screws are all carefully sanded and polished, so that it will not scratch your hands during use. A complete set of lock core replacement accessories can easily meet the installation and replacement of indoor door lock cores in daily life. And the replacement of the new lock core is very easy, so that you just need to use a flat-blade screwdriver to remove the damaged inner door mortise latch, and then replace the new mortise latch.
BrandZACUDA #ad
ManufacturerZACUDA #ad
Height0.1 cm (0.04 Inches)
Length4 cm (1.57 Inches)
Weight0.77
Width4 cm (1.57 Inches)

7. Yale

#ad

Yale Locks PM888ZP25 Mortice Latch 64mm 2.5-inch, Zinc Plated Visi Pack of 1

#ad
Yale #ad - Lightweight construction at just 013 kgs. High performace for the home or tradesman. Proven reliable Yale Locks technology.
BrandYale #ad
ManufacturerYale #ad
Height21 cm (8.27 Inches)
Length21 cm (8.27 Inches)
Weight0.11 kg (0.24 Pounds)
Width21 cm (8.27 Inches)
Part NumberYALPM888ZP25
ModelYALPM888ZP25

8. Loops

#ad

64mm Contract Standard Tubular Latch, Forends, Dust Box and Screws Included, Strike Plate, Rounded Strike/Forend, Nickel Plated | Standard Interior Door Latch

#ad
Loops #ad - Supplied with fixings. Various styles and finishes are available, if you cannot find what you’re looking for or would like a price for multiple units, please get in touch for more information. Premium materials and an excellent built quality ensures a smooth & reliable operation.
BrandLoops #ad
ManufacturerLoops #ad
Height2 cm (0.79 Inches)
Length15 cm (5.91 Inches)
Width9 cm (3.54 Inches)
Part Numberbc00199
Modelbc00199

9. FIGFYOU

#ad

Door Tubular Latch Chrome Finish Tubular Mortice Latch with Polished Plate & Screws 45 mm Tubular Latch Compatible with Various Door Lock Handles, FIGFYOU 5 Pcs Tubular Mortice Latch

#ad
FIGFYOU #ad - You can adjust the door lock slide rail by turning the screwdriver tube 180 degrees clockwise to reverse it, remove the screws of the old lock core, and remove the damaged indoor door handle. The surface of each lock cylinder has a 45m font logo. Easy to install: our products can be used with a variety of door lock handles.

You only need to use a screwdriver to remove the old bolt and replace it with a new one, no need to buy other accessories tool. Become effortless. 5 tubular latches: including 5 door lock slide rails and accompanying gasket accessories and screws. The highest quality of the product can protect the lock from damage, so it can guarantee the service life. Specially designed for interior doors: the tubular latch can provide a latch for inner doors that do not need to be locked, and is suitable for replacing wooden door lock cores of various shapes.

Standard 45mm margin: the length between the two holes is 5cm and the lock margin is 45mm. Each tubular latch comes with a polished brass bracket and a rectangular washer suitable for the latch surface and 4 screws. Then replace it with a new lock cylinder. Our square chamber lock cylinder complies with the European CE standard, and the lock is sufficient to meet the quality standard. Before purchasing, please confirm whether the lock margin and hole distance meet your needs.
BrandFIGFYOU #ad
ManufacturerYUANHERUI #ad

10. XFORT

#ad

Door Latch Designed to be Used with Sprung Lever Door Handles, Premium Mortice Latch, XFORT® 2 Sets of 65mm Polished Chrome Tubular Latch, Fire Rated to EN1634-1 Standards

#ad
XFORT #ad - Features: the xfort tubular latch provides latching for internal doors were no locking is required. This item should be fitted by a locksmith or someone suitably trained. Size & dimensions: for more details please refer to images for accurate measurements.

Ce approved, the xforT tubular latch meets essential European standards of quality. The guided latch bolt is made from solid brass whilst the lightly sprung latch mechanism makes opening and closing doors effortless. Whats included: all fixtures and fittings included along with screws. Fits comfortably into 25mm diameter hole. Each tubular latch comes with a polished chrome keep and a rectangular surface plate that fits over the face of the latch giving it a polished chrome rectangular finish as shown in the images.

Fire rated: to help prevent the spread of fire by ensuring doors remain closed in the event of a fire, the forte tubular latch has been approved in accordance with the EN1634-1 standards, making it suitable for fire and smoke door assemblies.
BrandXFORT #ad
ManufacturerMaher London Ltd #ad